Peerless MIS164T Especificaciones descargar pdf (Pagina 7)

2015-01-20 #:203-9485-1

2.5"

(64mm)

5/16"

(8mm)

1b-1

1b-2

Level wallplate. Mark mounting holes.

ENG

5/16"

(8mm)

Do not drill into mortar joints.

ENG

Drill mounting holes into supporting surface

(2.5" (64mm) minimum depth required).

ENG

ENG - When installing Peerless wall mounts on a concrete wall, the wall must be at least 8" thick with a minimum

compressive strength of 2000 psi. When installing Peerless wall mounts on a cinder block wall, the cinder blocks

must meet ASTM C-90 speciﬁ cations and have a minimum nominal width of 8". Do not drill into mortar joints!

Be sure to mount in a solid part of the block, generally 1" (25 mm) minimum from the side of the block. It is

suggested that a standard electric drill on slow setting is used to drill the hole instead of a hammer drill to avoid

breaking out the back of the hole when entering a void or cavity. Never attach concrete expansion anchors to

concrete or cinder block covered with plaster, drywall or other ﬁ nishing material.

WARNING

1 2 3 4 5 6 7 8 9 10 11 12

Sin comentarios

Peerless MIS164T Especificaciones Pagina 7